This innovative system, consisting of a specially designed angle and face plates, allows the Clear-Flex II® Strip Door to be mounted in either the lintel (inside frame, under-header) or side wall (header) position (note diagrams on this page).

Each PVC strip is secured between the vertical side of the angle and one foot face plate sections. Worn or damaged strips may be easily replaced by simply removing the necessary number of face plate sections, replacing the appropriate strips and reattaching the face plates.

Clear-Flex II® Strip Doors may be attached to a galvanized steel trolley system enabling the user to slide the strip door away from the doorway, thus allowing unobstructed traffic. Allow sufficient wall space for curtain storage on either side of the door as needed. Side wall mounted only.

Enables Clear-Flex II® Strip Doors to be mounted on inside of buildings in conjunction with conventional overhead (roll-up) doors. Bracket projects 8” and is designed to be welded or bolted into place. Brackets must be positioned so as to not interfere with normal door operations. Horizontal cross member required, but supplied by others. Safety orange replacement strips (8” x .080 x 14” long) may be attached to bracket projection for 3-sided enclosure. 
Field trim to desired length.