“MEDLF” SERIES Spec Sheet

“MEDLF” SERIES General Arrangement Drawing

“MEDLF” SERIES Owner/User Manual 

• Heavy duty operate handle with roller-bearing lift mechanism for easy “lift free” operation

• Torsion spring easily adjustable operation 

• Cold rolled steel hinge pins and secondary gussets for added strength and longevity 

• Grease fittings throughout unit

• High strength steel safety tread plate for deck and lip 70,000 lb yield tensile

• Heavy duty bumper blocks with Tuf-Cord bumpers – projection of 15” from wall

• 15” yieldable lip

““HED” SERIES Spec Sheet

“HED” SERIES General Arrangement Drawing 

“HED” SERIES Owner/User Manual

• Nema 4 single button control panel provides easy push button operation for smooth, consistent operation

• Full hydraulic control and operation via a dual cylinder design with lip and deck cylinders 

• Cold rolled steel hinge pins and secondary gussets for added strength and longevity 

• Grease fittings throughout unit

• High strength steel safety tread plate for deck and lip 70,000 lb yield tensile

• Heavy duty bumper blocks with Tuf-Cord bumpers – projection of 18” from wall

"H" Series Autodok® Spec Sheet

"H" Series Autodok® General Arrangement 

"H" Series Autodok® Owner/User Manual

• Easy push button operation control panel for smooth, consistent operation with a hydraulic system that provides for full float at all positions 

• Positive lip extension and retraction with true regenerative hydraulic control

• Below dock end load capability with fully yieldable lip

• Full width rear hinge mounted in compression with structural channel support

• Structural “C” & “I” beam deck supports 

• 4-way high tensile 50,000 minimum yield A572 safety tread plate for deck and lip

• Standard operable range of 12” above dock level and 12” below dock level

“HP” SERIES STANDARD Spec Sheet

“HP” SERIES General Arrangement Drawing 

“HP” SERIES Owner/User Manuall 

• Easy push button operation control panel for smooth, consistent operation with a hydraulic system that provides for full float at all positions
• 4-way high tensile 50,000 minimum yield A572 safety tread plate for deck and lip
• Velocity fuse hydraulic fail safe stops platform within 1” to 3” in free fall situation
• Sub frame design allows for easy pit clean out
• Integral maintenance strut is lockout/tagout compliant
• Standard operable range of 12” above dock level and 12” below dock level
• Full range toe guards

“MA” SERIES Spec Sheet

“MA” SERIES General Arrangement Drawing 

“MA” SERIES Owner/User Manuall 

• Easy push button operation for smooth, consistent operation with an air powered system that provides for full float at all positions.
• Automatic lip extension with yieldable lip
• Below dock end load capability
• Full width rear hinge mounted in compression with structural channel support
• Single phase 115V motor with simple single button control
• Low maintenance design
• Standard operable range of 12” above dock level and 12” below dock level.

“VSH” SERIES Spec Sheet

“VSH” SERIES Owner/User Manual 

• Easy push button operation for smooth, consistent operation with a hydraulic system that provides for full float at all positions 
• Power-up and power-down control panel with constant pressure push buttons for safety 
• Below dock end load capability
• Dual maintenance struts included for added safety 
• 4-way high tensile 50,000 minimum yield A572 safety tread plate for deck and lip
• Standard operable range of 10” above dock level and 8” below dock level

“MP” SERIES Spec Sheet

 “MP” SERIES General Arrangement Drawing

“MP” SERIES Owner/User Manual 

• Simple operation with a cam and roller counterbalance system that assures smooth dependable walk down 

• Unique hold-down assembly for full float and automatic release capability with air ride trailers 

• Easy pull-chain activation with finger tip release

• Full width rear hinge mounted in compression with structural channel support  

• Integral maintenance strut is lockout/tagout compliant with lip support strut that also allows convenient servicing of the lip

• Standard operable range of 12” above dock level and 12” below dock level

“STOP-TITE®” MANUAL Spec Sheet

“STOP-TITE®” MANUAL General Arrangement Drawing 

“STOP-TITE®” MANUAL Owner/User Manual 

• Manually activated restraint via an operate handle 
• Light Communication System with red/green inside/outside lights on MML and MA 
• Manual operation of lights with MML and automatic light operation with MAL
• Low profile, non-impact design (wall or driveway mount) 
• One (1) year base warranty on structural, hydraulic and electrical components

“STOP-TITE®” AUTOMATIC Spec Sheet

“STOP-TITE®” AUTOMATIC General Arrangement Drawing 

“STOP-TITE®” AUTOMATIC Owner/User Manual 

• Push button activation (115v single phase operation) with automatic light sequencing of inside/outside red/green lights 

• Unique dual locking restraint arm to minimize “trailer creep” 

• Interlock terminals for leveler and/or powered overhead door interlock

• Designed to accommodate rear impact guard (RIG) outlined in 1998 NHTSA regulation 

• One (1) year base warranty on structural, hydraulic and electrical components

“HOLD-TITE®” AUTOMATIC Spec Sheet

“HOLD-TITE®” General Arrangement Drawing 

“HOLD-TITE®” Owner/User Manual 

• Push button activation with PLC solid state controls (115 volt - single phase operation)

• Automatic light sequencing of inside/outside red/green lights 

• Low profile, non-impact design (wall or driveway mount)

• Auto restore and activation of amber caution light indicator if unable to secure trailers RIG

• Two (2) year base warranty on structural, hydraulic and electrical components and an additional three (3) years on structural